Blog

Featured insight

Cut-to-Length Line GuidesJul 31, 20269 min read

How Does a Flying Shear Work in a Cut-to-Length Line?

A practical explanation of how length measurement, speed synchronization, moving shear cutting, conveying, and stacking work together in a Flying Shear cut-to-length line.

Read article

Circular tooling section on a coil slitting line

Slitting Line GuidesOct 29, 20266 min read Coil Slitting Line Changeover Checklist: From Job Review to Production Release A changeover review for production teams: verify the new job, control setup records and release production only after checking every required strip lane. Read article

Cut-to-Length Line GuidesOct 26, 20266 min read Flying Shear Cut-to-Length Line Output Planning for Mixed Orders A mixed-order planning method that separates theoretical running output from accepted sheets per shift and identifies the real production constraint. Read article

Coil slitting line entry and loop section

Slitting Line GuidesOct 22, 20266 min read How to Evaluate a Coil Slitting Line Manufacturer A practical supplier-evaluation framework for buyers who need evidence of strip quality, production capability and support—not simply a maximum-width specification. Read article

Roller-leveler and cutting sections in a RONGXING cut-to-length line

Cut-to-Length Line GuidesOct 12, 20266 min read Tension Leveling vs Roller Leveling: What Coil Buyers Should Specify Tension leveling and roller leveling both improve strip flatness, but they use different deformation strategies and belong in different process decisions. Read article

Edge-scrap winding unit beside a RONGXING coil slitting line

Slitting Line GuidesOct 8, 20266 min read Strip Edge Trimming and Scrap Handling in a Coil Slitting Line Edge trim is a controlled production stream, not waste that can be ignored. Its width, stability and removal method affect quality, yield and uptime. Read article

Recoiler mandrel winding separated strips on a RONGXING coil slitting line

Slitting Line GuidesOct 5, 20266 min read Recoiler Tension and Coil Telescoping: A Slitting-Line Guide A finished coil records what happened across the whole slitting line. Use the winding pattern to separate tension, alignment, tooling and handling causes. Read article

Circular knife head on a RONGXING coil slitting line

Slitting Line GuidesOct 1, 20266 min read Slitter Knife Clearance and Overlap: How to Control Burrs Burr is not corrected by one universal knife setting. Learn how clearance, overlap, tooling, alignment and material condition interact during coil slitting. Read article

Complete RONGXING coil slitting line prepared for production and quotation review

Slitting Line GuidesSep 28, 20266 min read Coil Slitting Line Price: What Buyers Should Include in an RFQ A useful slitting-line quotation starts with the production duty, not a generic machine price. This guide shows buyers which technical and commercial inputs matter. Read article

Cut-sheet bundle being lifted at the stacking section

Cut-to-Length Line GuidesSep 18, 20263 min read Flying Shear Cut-to-Length Line Acceptance Checklist: From Test Coil to Finished Stack A useful acceptance test follows representative material from coil loading to a measured, protected and traceable finished stack. Read article

Need a line configured around your coil specification?

Send your material, thickness, width, target speed, and output requirement. The RONGXING engineering team will help review the right configuration.

Discuss your line configuration